Slide Protective Coating are based on nano technology protecting all types of surfaces.These coatings can be applied to any surfaces like glass, fabric, stone, metal paint, plastic, wood, chrome etc., Any surface you want to protect Slide protective coating can provide you the solution.
Its water and dirt-repellent properties makes SLIDE suitable for all glass in Indoor or outdoor applications like automotive glass, solar and glazing on the exterior of building, shower enclosures.
The strong chemical bond to the surface guarantees outstanding permanence to weather resistance, as well as mechanical and chemical durability.
This prevents the formation of water spots, limescale, mould , urine stains,
algae formation and germs.
Q. How long will the product function last?
Ans : Since the SLIDE coatings are UV-stable, functionality is possible over 5 years of time.
Precautions to be taken for the product to last: - No abrasion - No use of strong chemicals, powder based cleaners to be used for cleaning.
Q. How does Slide coating help.
Ans : Studies done show that the visibility increases by almost 34% and hence the fast reflex time to act while driving. It also keeps the glass surface clean and does not allow the insects etc to adhere to the glass.
Q. Where all SLIDE coatings can be used?
Ans : Shower cubicles, sinks, toilets, solar panels, mirrors, windows, car front windscreen and windows.
Q. Is the SLIDE coating food-safe?
Ans : Yes, as confirmed by a CBA certificate.
Q. How fast is the SLIDE coating stable after the application?
Ans : The water-resistance is guaranteed only seconds after application. Water dropping over the glass after 15 min of application is not going to effect the coating. Abrasion and chemical resistance should first be tested after 24 hours since a post-cross linking of the product takes place. Avoid using the wiper blades for the first 24 hrs.
Q. Does the SLIDE coating impact the visual appearance?
Ans : No! Because of the small layer thickness (about 1/10 of a micron), there is no impact on visual appearance or feel of the coating.
Q. Can the SLIDE coating be reapplied?
Ans : Yes, in the case of damage e.g. through permanent abrasion, it can be reapplied like an initial application.
Q. Can two coats of SLIDE coating be applied?
Ans : No! A 2nd coating will not adhere to the 1st coat! And it’s not required as it will do no good.
Q. What cleansers can be used to clean the surface after SLIDE coating?
Ans : We recommend pH-neutral liquid cleansers.
PLEASE AVOID POWDER BASED CLEANERS OR ABRASIVE CLEANERS.
Q. The beading effect is not working all of a sudden!
Ans : SLIDE coating is probably dirty – Dirt particles on the coating prevent beading – Just clean with shampoo or mild detergent and the effect will return.
Q. What are the main advantages of a SLIDE coating compared to competitive products?
Ans : Permanent, chemical and abrasion resistance, UV stable, affordable.
Q. Can Slide coating be done on other surfaces apart from glass and ceramics?
Ans : We have different coating materials for glass and ceramics, fabrics and upholstery, paints and plastics and for granite and marble.
It helps to keep the products free from liquid soiling marks, and makes them easy to clean.
All the SLIDE coatings are breathable.
Its water and dirt-repellent properties makes SLIDE suitable for all non absorbent surfaces applications.
Gives non-absorbent surfaces, particularly painted, stainless steel or plastic surfaces reliable protection against
contaminants, graffiti, acid and oxidization. Hence polished natural stone (kitchen worktops) can be protected from acid corrosion.
Its long lasting properties extend the scope of application to automotive paints, timber
and building protection.
The strong chemical bond to the surface groups guarantees outstanding permanence in relation to weather resistance, as well as mechanical and chemical durability.
How does Slide Ceramic Coating helps to keep the vehicle looking new.
Hybrid Slide Nano Ceramic Coatings are the newest form of protection available for your car paint.
They offer unmatched protection and durability and should be your first choice for new car protection or after a paint restoration.
The coating is made from suspended nano-particles of silicon dioxide in a hard resin that binds permanently to the paint of your vehicle at the molecular level.
Durability: Coatings have a minimum expected protection of three years and if maintained properly can often last much much longer. Compared to waxes that last about 4 weeks and sealant that last 6 months, it offers
peace of mind and time saving when it comes to protecting the paint of your vehicle thereby making the vehicle look new for years to come.
Swirl resistance: Coating being much harder than the paint, help prevent swirl marks from forming when washing the vehicle. They even offer some light scratching protection.
UV Protection: The paint on your car has a half-life of about 5 years. This is due mostly to the UV radiation from the sun. Coatings offer protection from these damaging rays and will help preserve your paint’s integrity
delaying the dreaded clear-coat failure that usually occurs after about 10 years from purchasing the vehicle.
Chemical Resistance: Coatings are almost invulnerable to both acids and bases. So they offer amazing protection from both acid rain and strong chemical cleaners.
Hydrophobic characteristics: Coatings repel water. This makes it hard for dirt and grime to bind to it.
This helps your vehicle remain clean for longer. No hard scrubbing or harsh chemicals required.
Protection from oxidation: By covering the paint, the coating prevents oxygen to attack the clearcoat and helps paint colour retention. Avoids fading of paint.
What does this all mean for you as a car owner?
- Coatings offer incredible shine to the paint that will last for years.
- Cleaning your vehicle will be easier and you will have to do it less often.
- Your paint will be protected from both chemical and physical
damage.
- You will not be forced to wax the vehicle once a month to have it protected and looking good saving you both time and money on the long run.
Why are coating so expensive compared to waxes and sealants?
Because the coating is a permanent product, think of it as a second paint layer. We have to insure the paint it will be protecting is as perfect as possible. Any issue with the paint would be locked in under the coating and could only be addressed by
removing the coating.
Also , in order to insure a perfect bond of the product with your paint, we have to spend a lot of time preparing the surface. Also, any defect such as scratches,
swirls, or marring has to be corrected before the coating can be applied.
Lastly, the application of the coating is both time sensitive and method specific. Coatings are more difficult to apply and require specific
training, where a wax can be applied by anyone without any training.
What areas of the vehicle will your apply the coating to?
Hybrid Slide Ceramic Coating can be applied on to each and every external part of the vehicle.
Imagine invisible protection with the strength to repel up to 95% of dirt and 98% of moss, moulds and fungus from absorbent materials such as stone, concrete,brick or terracotta - and lasting over 10 years*.
Coating creates
an ultra-thin breathable 3D network on the surface of the substrate, which permanently repels water and dirt from the porous structure.
Thus coated materials exhibit 3-fold freeze/thaw resistance (EN 1338) and stay
clean for over a decade.
Its water and dirt-repellent properties on all mineral and absorbent surfaces also extend the scope of application from stone monuments to teracota
The strong chemical bond to surface guarantees
outstanding permanence in relation to weather resistance, as well as mechanical and chemical durability.
Stains on stones and facades are able to cause a large number of problems. First of all, stains affect the optics
of stones and facades, which may influence both the aesthetic and the real property value. On the other hand, removing stains is often complicated, which results in stones and facades requiring frequent cleaning cycles.
The consequences are increased cleaning costs and a high consumption of water and cleaning agents. Furthermore, stains may cause dirt particles to deposit on the surface of stones and facades, thus damaging the same, i.e.,
stones or facades may get more susceptible to additional damages due to dirt deposits. Last but not least, stains may also be harmful to health, especially their origin can be found in pollutants such as oil or chemicals.
A stain protection impregnation on mineral surfaces such as natural stones and concrete may have the following ecological and economic advantages:
Reduction in cleaning frequencies: A stone protection impregnation prevents dirt and stains from sticking to the stone surface, thus requiring less cleaning of the stones.
The result is a reduction in cleaning costs
and simultaneously a reduced consumption of water and cleaning agents.
Longer durability of stones: A stone protection impregnation allows to maintain the appealing optics of stones for a longer period. Moreover, it
results in a longer durability which reduces the intervals at which to exchange stones, which again contributes to a reduction in waste and consumption of resources.
Slide Fabric Protector is professional stain protection for all kinds of fabrics and upholstery.
Slide when sprayed forms an invisible shield against common household stains,protecting fabric so it looks cleaner and fresh
for longer.
Slide can be used on fabric upholstery, micro fibre, rugs, carpets, drapery, table linen, auto fabric interiors, apparels and nubuck and suede leathers. Slide coatings are long lasting.
No difference
in look and feel of the fabric after the coating is done
Prevents staining and frequent washing there by keeps the fabrics looking new longer Will last for several washes
Typical Application of Slide Coating for Fabric
Coating is composed of hydrophile nano particles based on pure silicon dioxide. This why the product spreads the water on the surface which has the advantage that even without any rain , dirt and dust will stick less on to the surface. In case of rain on the other hand the dirt will be spread on the solar panel which prevents dirt concentration from coming up.
No high spots due to normal glass coating which creates water to form in beads on the surface and there by blocking light
Extended maintenance cycles: The protection offered by Our Products allows us to reduce the maintenance work. This means that you have to take less effort in terms of time and money for maintenance.
Durable representative look: Our Products do not only protect against damages but also maintain the appearance. Our coatings allow buildings and constructions to maintain longer their representative optical condition.
Longer durability: The enhanced protection of materials results in a more durable building fabric, thus allowing you to profit from your investment for a longer period.
All in all, building protection has the advantage of increasing the lifetime of buildings, of saving resources, and of reducing environmental pollution. At the end, all these aspects will enhance sustainability in building protection.
Nearly all damage to mineral building material is caused by humidity. The porous structure of these building materials allows water and all pollutants included in the water to penetrate. Capillary effects are the reason for these materials being transported from the surface into the interior of the building, which may cause a large number of damages to the building material, such as corrosion of the reinforcing bars, efflorescence, and damages due to frost and antifreeze salt.
It is imperative to prevent water from penetrating to avoid damage and to reduce penetration depth. One possibility of achieving this aim is to treat the substrate with the coatings. The product penetrates deeply into the underground, forming a durable and efficient protection against humidity. At the same time, the substrate maintains its breathability and deviates the humidity from the inside to the outside.
SLIDE penetrates deeply into the building material, thus providing a protection that is affected neither by UV radiation nor by abrasive contamination such as road traffic.
Compared with a pure surface coating SLIDE shows a significantly longer durability.
This product range does not cause any visible change to the surface of the building material.
After the application of SLIDE on the surface, this one can be further processed, e.g., with a painting.
